1. Soil Loosener

Soil looseners can be divided into single-tooth and multi-tooth types, which are mainly used in working conditions when the soil is heavily affected by atmospheric influences.

It is difficult to handle a bucket in the weathering zone, but the crusher is too hard, and an intermediate soil loosener will come in handy.

First, use the loosener for digging and loosening the soil, remove the layer of soil and weather the layer of fossils, and then use a quick-release connector to replace the digging bucket and load the soil, which significantly increases construction efficiency.

2. Auger Drill

Auger drills rely on drill pipes that drive rotation and cut the soil during the working process, then lift it out of the borehole for soil cutting. They are mainly used for drilling operations in various types of soil, such as tree planting, well drilling, coal sampling, etc.

3. Vibratory Rammer

The principle of operation of the vibratory rammer is based on using a hydraulic engine to rotate an eccentric mechanism, and the vibration created by the rotation acts on the material being compacted through the ramming plate, giving it tightness.

The vibratory rammer is easy to operate and has a good compaction effect. It is mainly used for compacting sloped roads, water protection embankments, building foundations, etc.

It is suitable for compacting materials with lower adhesion between particles, such as river sand, gravel, asphalt, etc.

4. Breaker Hammer

Breakers should be common for everyone. Its principle of operation is based on static liquid pressure as an energy source, driving the piston in a reciprocating motion and striking the drill rod, which crushes ore, concrete, and other solid particles.

When choosing a crusher, the owner should pay attention to selecting a crusher of the appropriate size according to the excavator model, operating conditions, diameter, and width of the drill rod.

5. Hydraulic Shears

Hydraulic shears, also known as hydraulic pliers, are a powerful tool for demolishing old buildings.

Hydraulic shears mainly consist of a clamp body, hydraulic cylinder, movable jaw, fixed jaw, rotating mechanism, and other parts. When an excavator is equipped with hydraulic shears, the hydraulic cylinder provides power, so the movable jaw and fixed jaw of the hydraulic crushing pliers come together one after another to achieve the effect of crushing objects, and the rotating mechanism can adjust the tilt angle to facilitate work.

6. Wood Grabber

The shape of the wood grabber is similar to a mechanical claw in a claw machine, and it is usually used for carrying wood, bamboo, pipes, and other materials.

After transforming and refining the design of the grabber, it can also perform loading and unloading operations with stone and steel, making work with the loading and unloading trolley very convenient and fast.